Switches & Points
Last updated: July 10, 2020
Widget size: 1 x 1
This widget displays all of the elements described for the "Switches Widget", but can also display images and point readings that are linked to the switches. For example, the status of a point (like a freezer) can be displayed, as well as the inside temperature.
Up to 8 switches can be displayed at one time, whereas 5 separate images and points can be displayed. The parameters can be changed from temperature and humidity to anything that suits your application of the widget.
Note that the widget is for single site use only.
Customisation
Value | Default | Comment |
---|---|---|
Widget Heading | Switches + Points | Enter the name of the widget as it is to appear in the heading. |
Switch ON icon | images/SwitchON.gif | The location for the On image. |
Switch OFF icon | images/SwitchOFF.gif | The location for the Off image. |
Drilldown | engineeringChart.jsp | By default the widget can drill down to Engineering Charts, but an alternative can be specified if required. Specify the Comparison Chart URL (comparisonChart.jsp) or the Single Charts URL (multipleCharts.jsp) |
Show Legend | Yes | Display the legend (or key) - Yes / No. |
Show Bottom Box | Yes | Display the bottom box with 3 additional points (Bottom Box Point 1, 2, 3) - Yes / No. |
Box x Text Colour (x2) | Change the colour of the respective box text. This is for if other points are used as opposed to the defaults. This applies to all other points below, including the images and text. | |
Box x Background Image (x2) | Change the image for the respective box. | |
Box x Text (x2) | Edit the text for the respective box. | |
Bottom Box x Text (x3) | Edit the text for the respective segment in the bottom box. | |
Bottom Box x Background (x3) | Change the image for respective segment in the bottom box. | |
Replace "On" in the legend | Yes | Change the default 'On' in the legend, in case the status is different, i.e. 'in use'. |
Replace "Off" in legend | No | Change the default 'Off' in the legend, in case the status is different, i.e. 'not in use' |
Refresh Period | No | Widget refresh Select a refresh period from the drop down menu from between 15 seconds to 1 hour, or no refresh at all. |
Properties
Value | Description | Comment |
---|---|---|
Switch1 - Switch8 | Switch 1 - Switch 8 | ID of point to be displayed. |
TEMP | Temperature point | ID of point to be displayed. |
HUMIDITY | Humidity Point | ID of point to be displayed. |
POINT1 | Bottom Box Point1 | ID of point to be displayed. |
POINT2 | Bottom Box Point2 | ID of point to be displayed. |
POINT3 | Bottom Box Point3 | ID of point to be displayed. |